product description 

Product details

The 3500/22M Transient Data Interface Module (TDI) is the interface between the 3500 monitoring System and compatible software such as System 1 condition monitoring and diagnostic software and 3500 system configuration software. The module combines the capabilities of a 3500/20 rack interface module (RIM) with the data collection capabilities of a communications processor such as TDXnet. The TDI is installed in a slot next to the power supply in the 3500 rack, and it connects with the M Series monitors (e.g. 3500/40M, 3500/42M, etc.) to continuously collect steady-state and transient dynamic (waveform) data and pass this data to the host software over an Ethernet link. See the Compatibility section at the end of this file for more details.

TDI has standard static data capture capabilities. However, by enabling the disk with an optional channel, TDI can also capture dynamic and high-resolution transient data. The TDI integrates the functions of a communications processor in a 3500 rack.

Although TDI provides some common functions for the entire rack, it is not part of the critical monitoring path and does not affect the normal operation of the overall automatic mechanical protection monitoring system. Each 3500 rack requires a TDI or RIM, which always occupy slot 1 (next to the power supply).

Specification parameters:

Input:

Power consumption: 10.5W

Data:

Front panel USB-B

10Base-T/100Base-TX I/O: 10Base-T or 100Base-TX Ethernet, automatic sensing

100Base-FX I/O: 100Base-FX Optical Ethernet

Output:

Front panel LED:

OK LED: indicates that 3500/22M is working properly

TX/RX LED: Indicates 3500/22M to communicate with other modules in the rack

TM LED: Indicates that rack 3500 is in triple failure mode

CONFIG OK LED: Indicates that 3500 rack has a valid configuration

I/O module OK relay function: indicates that the 3500 rack is operating properly or that a fault has been detected within the rack. The user can select the "On" or "Off" status to indicate the rack status.

In summary, the 3500/22M transient Data interface module plays a crucial role in the 3500 monitoring system, acting as a bridge between the system and compatible software, capable of collecting and transmitting critical steady state and transient dynamic data. Its standard static data capture capabilities and optional dynamic data capture capabilities give users a more complete picture of the operating status of the device. At the same time, its rich LED indication and relay output functions provide users with intuitive equipment status monitoring means. Whether used for routine equipment maintenance or troubleshooting, the 3500/22M transient data interface module is an indispensable key component.

Product Parameter

Model Number: 3500/22M 288055-01

Origin:USA

Bently series of products