product description 

Product details

The KJ4110X1-BC1 is an 8-channel analog input card designed for industrial automation that supports 4-20mA current signals and is compatible with the HART communication protocol. The card is designed for use in hazardous environments and is explosion-proof certified for use in areas with potential explosion hazards.

Main specification

Signal type: 8-channel 4-20mA input

Communication protocol: HART

Explosion-proof class: II 3 G Ex nA [ic] IIC Gc and II 3 G Ex nA [nL] IIC Gc

ATEX/IECEx certification: FM13ATEX0034U and IECEx FMG 13.0015U

Power supply specification

Local bus power supply: Not applicable

Bus field power supply: 12 VDC at 150 mA or 24 VDC at 300 mA

Field circuit power supply: 24 VDC at 30 mA/Ch.

Environmental specification

Ambient temperature: -40 °C to +70 °C

Shock: 10 g half sine wave, lasting 11 ms

Vibration: 2 to 13.2 Hz, peak-to-peak value 1 mm; 13.2 to 150 Hz, 0.7 g

Air pollutant: Compliant with ISA-S71.04-1985 Air Pollutant Class G3

Relative humidity: 5 to 95% without condensation

Installation and operation

Note: Specific instructions must be followed when installing, removing and operating this product in hazardous areas. Refer to document 12P2046 "DeltaV TM Scalable Process System Area 2 Installation Instructions" and other related installation manuals.

Remove and insert

Power disconnection: Before disassembling or connecting the device, the field power supply to the device must be disconnected, either through the field terminal or through the bus field power provided by the carrier.

Loop evaluation: I/O loop evaluation must be completed on all energy-constrained nodes.

System power supply: This unit can only be removed or inserted when the system power supply is not powered on.

Rotary keying system: To ensure compatibility between the I/O card and the block after installation, the block must have the appropriate key for the I/O card used.

Maintenance and adjustment

User not repairable: There are no user repairable parts in this unit and it cannot be disassembled for any reason.

Calibration: No calibration required.

Note: Please refer to the product label for serial number, manufacturing location and manufacturing date.

Warning: Specific instructions for the installation, removal and operation of this product in hazardous areas must be followed.

Product Parameter

Model Number: KJ4110X1-BC1

Origin:USA

EMERSON series of products