product description 

Product details

Yaskawa servo drive

Preparatory work

Make sure all equipment and accessories are in place and conduct a preliminary inspection.

Check the quality and connectivity of cables, connectors, and power supply lines to ensure a safe and reliable power supply.

Prepare tools and instruments, such as screwdrivers and voltmeters.

Installation procedure

Determine the installation position: According to the specific application requirements and equipment requirements, choose a stable support platform to ensure the stability and reliability of the drive.

Fixing the driver: According to the size and weight of the driver, choose the appropriate mounting method, such as using bolts, screws and brackets to fix the driver.

Connecting cables: Select appropriate cables and connectors based on the communication mode between devices. Make sure the connection is correct, strong and reliable, and carry out the necessary insulation and protective measures.

Grounding treatment: The servo drive is grounded to ensure the safe operation of the electrical equipment. The ground cable must be connected to an appropriate place and the grounding resistance must meet the requirements of relevant standards.

Installation accessories: According to the actual requirements, install and connect the servo drive accessories, such as cooling fans, filters, etc. Ensure that accessories are installed in the correct position and in good contact, and make necessary adjustments and fixes.

Debugging procedure

Power supply check: Before switching on the power supply, check whether the power line is correctly connected and the voltage meets the requirements of the device. Then, gradually turn on the power of each circuit, and check whether its voltage and current are normal.

Parameter setting: Set the parameters of the servo drive according to the specific application requirements. These parameters include basic parameters (such as motor type, voltage and power, etc.) as well as motion control parameters, protection parameters, etc. Ensure that the parameters are set correctly to ensure the normal operation of the drive.

Dynamic debugging: On the premise of ensuring security, dynamic debugging of the driver. You can send instructions through the controller to control the movement of the drive, observe and check whether it meets the expected effect. If necessary, the parameters can be fine-tuned and optimized to achieve better motion control.

Troubleshooting: During debugging, if a problem occurs or the device cannot work properly, troubleshoot the problem in time. It can detect voltage, current and communication through the instrument, locate the fault, and make the corresponding repair and adjustment.

Parameter setting and modification

Modify parameters using Yaskawa servo parameter operator. First, plug the operator into the operator interface of the servo drive, and then turn on the power switch of the operator.

Press the "MODE" button on the operator to enter parameter modification mode.

Use the "UP" and "DOWN" buttons to select the parameters you want to modify.

Press the "RIGHT" button to move the cursor to the parameter value, then use the "UP" and "DOWN" buttons to modify the value.

After the modification is complete, press the "ENTER" button to confirm the modification and press the "MODE" button again to exit the parameter modification mode.

Finally, press the "ENTER" button to save the modified parameters.

Note that before modifying Yaskawa servo parameters, you are advised to back up the original parameters to avoid device damage caused by incorrect modification. In addition, modify parameters based on the device and application requirements. You are advised to perform operations with relevant experience or guidance.

Product Parameter

Model Number: UGRMEM-01SNQ12

Origin:JP

Yaskawa series of products