product description 

Product details

The 3500/15 AC and DC power supplies are half-height modules that need to be installed in the designated slot on the left side of the rack. The 3500 rack can contain one or two power supplies, which can be any combination of AC and DC. Any one power supply can power the entire rack. When two power supplies are installed in the rack, the one in the lower slot acts as the primary power supply, while the one in the upper slot acts as the secondary power supply. If a second power supply is installed, it will act as a backup to the primary power supply. As long as the second power supply is installed, removing or inserting either power supply module will not affect the normal operation of the rack.

3500/15 AC and DC power supplies are capable of accepting a wide range of input voltages and converting them to voltages acceptable to other 3500 modules. In the 3500 Series mechanical protection system, the following power supplies are available: universal AC power supply, high voltage DC power supply, and low voltage DC power supply.

For input voltage options, the Universal AC power supply uses a Universal AC Power input module (PIM) with input voltages ranging from 110 to 220 Vac (nominal), 85 to 264 Vac (RMS), and 120 to 373 Vac (peak). It should be noted that this universal AC power supply and power input module are not compatible with older high voltage AC or low voltage AC units.

The high voltage DC power supply option uses a high voltage DC power supply and a high voltage DC Power input module (PIM) with an input voltage of 88 to 140 Vdc. The low voltage DC power option uses a low voltage DC power supply and a low voltage DC power input module (PIM) with an input voltage of 20 to 30 Vdc.

In terms of current information, all power supply options do not cause damage to the supply or PIM in the case of undervoltage. Overvoltage will cause the fuse on the PIM to blow. At full load, the maximum current consumption of the rack is 2.8 A rms for general purpose AC power supplies, 2.5 A for high voltage DC power supplies, and 11.0 A for low voltage DC power supplies.

These power supplies provide stable and reliable power support for the 3500 series mechanical protection system, ensuring that the system can operate properly in a variety of operating environments.

Product Parameter

Model Number: 3500/15-02-02-00

Origin:USA

Bently series of products