product description 

Product details

A servo motor from A-B, which belongs to the VP series under the A-B Kinetix brand, has A low inertia characteristic. The following is a detailed explanation of the technical parameters you have given:

400 VAC:

This is the rated voltage of the motor, that is, the AC voltage that needs to be provided when the motor is working normally is 400 volts.

100 MM:

This may refer to a certain size of the motor, such as the flange diameter of the motor, the shaft diameter, or the size of other key components. However, the specific size of the motor needs to be determined by looking at the technical specifications of the motor.

3 MAGNET STACK:

This means that there are three sets of magnets stacked inside the motor, which are used to generate a magnetic field, which in turn drives the motor's rotation.

4500 RPM:

This is the rated speed of the motor, that is, the maximum speed that the motor can achieve under rated voltage and load conditions is 4500 revolutions per minute.

18-BIT ABSOLUTE MULTI-TURN (4096 REVOLUTIONS) DIGITAL ENCODER (HIPERFACE DSL PROTOCOL) :

The motor is equipped with an 18-bit absolute multi-turn digital encoder, which means that the encoder can record the number of turns of the motor with very high accuracy.

"4096 REVOLUTIONS" refers to the maximum number of revolutions the encoder can record as 4096.

The "HIPERFACE DSL PROTOCOL" is a communication protocol used by encoders to exchange data with external devices such as controllers.

SHAFT KEY:

This usually refers to a fixation on the motor shaft that ensures a strong connection between the motor shaft and transmission components, such as couplings.

SINGLE SPEEDTEC DIN CONNECTOR:

This may be a type of interface or connector where the motor is connected to an external device to transmit control signals or power supplies, etc.

RIGHT ANGLE:

This may refer to the fact that the output shaft of the motor is rectangular, that is, the shaft of the motor is at a 90 degree Angle to the mounting surface of the motor.

325 ROTATABLE:

This may describe the range or Angle at which the motor or a component on the motor (such as a cable interface) can be rotated.

24 VDC BRAKE:

The motor is equipped with a 24-volt DC brake that is used to quickly stop the motor's rotation if needed.

Product Parameter

Model Number: VPL-B1304E-PJ14AA

Origin:USA

A-B series of products