Product details

• Catalog Description:

• DSQC1031 Digital add on

• Technical Information:

• DSQC 1031 is delivered without connectors
  Connector set can be purchased separate,3HAC060919-001

• Country of Origin:
• Sweden (SE)
  
• Invoice Description:
• DSQC1031 Digital add on
  
• Minimum Order Quantity:
• 1 piece
  
• Selling Unit of Measure:
• piece
  
• Order Multiple:
• 1 piece

The extension module should be subordinate to the function module, the extension module is to use each special function and the PLC cpu does not change the function of the function module. Such as input and output modules, A/D, D/A modules, communication modules, positioning modules and so on. His expansion points and quantity, voltage, current, etc. should refer to the corresponding electrical parameters of the datasheet.

PLC and DCS system in common

①DCS: Distributed control systems (distributedcontrol systems).

PLC: Programmable Logic Controller (PLC). Both have different emphasis and are advanced.

②DCS focuses more on the process control field (such as chemical, smelting, pharmaceutical, etc.) is mainly the monitoring and adjustment control of some field parameters, while PLC focuses on logic control (machining class). Of course, the current PLC can also deal with process control problems well, but there is no DCS professional.

(3) If the simulation quantity is greater than 100 points, DCS is generally used; If the analog quantity is within 100 points, PLC is generally used.

DCS is a "distributed control system", and PLC is just a control "device", the two are the difference between "system" and "device". The system can realize the functions and coordination of any device, and the PLC device only realizes the functions of this unit.

The DCS network is the central nervous system of the whole system, DCS system usually uses the international standard protocol TCP/IP. It is a safe and reliable double redundancy high-speed communication network, the system is more extensible and open. Because the PLC basically works for a single small system, when communicating with other PLC or host computer, the network form used is basically a single network structure, and the network protocol is often inconsistent with international standards.

All I/O modules of DCS system are equipped with CPU, which can realize the acquisition and output signal quality judgment and scalar transformation, fault charging, random replacement. The PLC module is just a simple electrical converter, there is no intelligent chip, and the corresponding unit is all paralyzed after the failure.

ABB series of products